Use Of Stool Function; Cleaning And Maintenance; What If There Are Problems - Beurer FM 120 Gebrauchsanweisung

6.3 Use of stool function

 CAUTION
The stool function is suitable up to a body weight of 100 kg. Never stand on the stool. Do not let your full
body weight fall onto the stool.
Between your massages, you can use the device as a comfortable stool.
1. To do so, store the mains cable and the mains adapter in the foot section of the device.
2. Close the lid . You can now use the device as a stool. It is suitable for sitting on or resting your legs.
1

7. CLEANING AND MAINTENANCE

Cleaning the device
 WARNING
Unplug the device each time before cleaning. Clean the device using only the methods specified. Liquid
must not penetrate the device or the accessories under any circumstances.
1. Clean the device with a slightly damp cloth.
2. If it is very dirty, you can also moisten the cloth with a mild soapy solution.
Cleaning the covers
The removable covers
on the care label.
1. To remove the covers from the device, open the zip fastener on the covers
2. Wash the covers by hand.
3. Allow the covers to dry. Only insert the covers into the device again when they are completely dry.
4. Ensure that the zip fasteners of the covers are firmly attached to the device.
Storage
The device is intended to be part of your living space, even when the massage function is not being used.
Store the device away from children and pets. Do not place any objects on the device.

8. WHAT IF THERE ARE PROBLEMS?

Problem
The massage heads
are rotating too
slowly
The massage heads
do not move
of the massage heads can be washed by hand. Observe the care instructions
4
Possible cause
The load on the massage heads is
too great
The device is not connected to
mains power supply.
Overheating protection has been
triggered
Solution
Free up massage heads
Plug the mains adapter into a suitable
socket and switch on the device
Disconnect the device from the power
supply, wait at least 15 minutes, then
plug in again and switch on
18
.
4