Cleaning And Maintenance; What If There Are Problems - Beurer MG 153 Gebrauchsanweisung

Massage examples
The examples depicted above show possible ways to use the device. Depending on your personal needs,
the massager can also be used to massage the upper back area, the thighs and the calves.

9. Cleaning and maintenance

Cleaning
WARNING
• Always unplug the mains adapter from the socket and disconnect it from the device before carrying
out any cleaning.
• Clean the device using only the methods specified. Under no circumstances may liquid enter the
device or the accessories.
• Small marks can be removed using a cloth or damp sponge, and some liquid delicate laundry
detergent where necessary. Do not use any solvent-based cleaning products.
• Do not use the device again until it is completely dry.
Care
If you do not plan to use the device for a long period of time, we recommend that you store it in the original
packaging in a dry environment, ensuring it is not weighed down by additional items.
Note
The cover of the kneading rollers and pinch nodes is washable at 30°C.

10. What if there are problems?

Problem
Massage heads
rotating too slowly.
Massage heads do not
move.
Neck massage:
• Place the massager around your neck.
• Set your desired contact pressure using the handles.
Back massage (lower back area):
• Place the massager around your hips as shown.
• Set your desired contact pressure using the handles.
Cause
The load on the massage
heads is too great.
The device is not con-
nected to mains power
supply.
Solution
Free up massage heads.
Connect the mains adapter and switch on the
device.
15