NORAUTO NS-228 DBT Hinweise Zur Bedienung Seite 104

Call Transfer
EN
You can transfer voice from loudspeaker to mobile phones during
call.
During talking, press and hold
to mobile phone.
Bluetooth Audio Streaming A2DP
If the connected Bluetooth device supports Advanced Audio
Distribution Profile (A2DP), you can listen to the music stored on
the device through the unit. If the device also supports Audio Video
Remote Control Profile (AVRCP) profile, you can use the control on
the unit or its remote control to play music stored on the device.
1 Press SRC repeatedly to select [BT AUDIO].
2 Press
3 To track up/down, press
DAB Operation
DAB RADIO
1 Browse through the programme sources with the SRC button to
DAB.
2 Press the menu button repeatedly when the product is in DAB
mode to browse through the menu options: SCAN=>12V
ON / OFF=PRUNE(DAB RESET)=RE-CON= RGB COLOR =CLK=BEEP
SCAN
1 Press the button (MENU) to select the station search function
SCAN, and confirm by pressing the power switch button.
2 The system searches for DAB stations.
3 The number of stations found is shown in the display and first
station found is played. Press the button for about 2 seconds
to save the station in the station memory under the required
shortcut button (M1-M6). Tap the required shortcut button to set
the station.
104
to start play, press it again to pause.
voice transfers from loudspeaker
.
/