NORAUTO NS-228 DBT Hinweise Zur Bedienung Seite 103

Getting Started
Before use the Bluetooth device, you need to pair the device to the
unit. Pairing needs only to be done once.
Pairing the Bluetooth devices
1 Open your mobile phone and switch bluetooth on.
2 Search for other bluetooth device with your device.
3 Select "NS-228 DBT" in the pairing list.
4 [PAIRED] will be displayed on the panel if pairing is successful,
and the paired device will connect to the car audio system
automatically.
Making a Call
You can dial number through the mobile phone.
1 Use the Mobile Phone to dial and make an outgoing call.
2 Once completed the dialing, [CALLING] is displayed.
To redial number
1 Press
on front panel to redial.
2 The unit will display [CALLING], and the unit starts dialing the
number dialed last time.
Remark:
To make an outgoing call on this unit, the bluetooth connection
between the unit and the phone must be active.
Receiving a Call
1 If there is incoming call, the phone number is displayed. If the
incoming call has no phone number, [PHONE IN] is displayed.
2 Press to answer/accept the call.
3 When conversation ends, press
to terminate the call.
EN
103