Listening to Radio
Touch the RADIO ICON in home menu to enter the
RADIO mode:
Selecting The Frequency Band
Touch the screen of " BAND" section repeatedly to
select the band, themessage will show in turn: (FM1,
FM2, FM3, MW1 und MW2).
When an FM stereo broadcast is hard to
receive
Press ST/MO button on the remote control to select
the MONO or STEREO mode. (When Stereo mode is
activated, the ST symbol will appear.)
Start Searching For a Station
Manual Search
During Radio mode, briefly touch "" to increase
frequency by one step of channel spacing.
Briefly touch "" to decrease frequency by one step
of channel spacing.
Automatic Search
During Radio mode, touch and hold (for more than 2
seconds) either "/" ICONS to start search for a
radio station automatically.
To tune in strong-singnal FM Station only
(LO/DX function)
In radio model,Longer press the sel then rotate the
VOL knob to choose
knob repeatedly to select LOC/DX, between the LOC
and DX mode of Local and Long-distance traffic
news.
Touch Screen Operation
Storing and Listening to a Memory Station
Automatic Preset Setup
In Radio Mode, touch and keep (for more than 2 ' S)
the screen of " APS " range to active automatic
station storage.The radio searches within the current
frequency band, e.g. FM1, for the stron- ger signal
level until the search cycle has finished . The six
strongest
corresponding storage locations.
Then the station of the first storage location is set.
Scan Function
In Radio mode, briefly touch the "APS" section on
the touch screen , the radio briefly plays all the
preset stations of the frequency band.
RDS Function
Touch "RDS" on the setting menu, touch the „/"
ICONS to select the adjustment item, touch the
„/" ICONS to adjust the selectment item, it
depends on your habit to setup the data.
Store in Memory
>Select the frequency band
>Select the station
>Keep the desired memory key pressed in
until the station is heard again after a brief
interruption.
Retrieve a preset station
Touch the 1-6 ranges briefly to retrieve a
station which had been stored in the
memory in advance the chose number is
shown on display.
stations
are
then
allocated
to
the
,