Inserting The Battery - auna TC7-MVD-180 Bedienungsanleitung

13 Menu/Subwoofer
14 BAND (OSD)
15 On/Off/MOD
16 Play/Pause
17 MUTE
18 TITLE/PBC (A/PS)
19
/
20 ZOOM/
ANGLE
21 EQ/LOUD
22 
23 ENTER
24 
25 0-9
26 +10/#
27 1-6
Preparing the Remote Control

Inserting the Battery

1. First push to inside as the direction indicated by the arrow (See 1) and then Remove the battery
holder as the direction indicated by the arrow (See 2).
2. Replace the battery Set a new battery property with (+)side up as illustrated (See 3).
3. Insert the battery holder. Push in the holder to the original position (See 4).
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal receiver).
Operation angle: About 30 degree in each the direction of the front of the IR mark.
Note :
The lithium cell in the battery compartment of remote control has been secured for transport with a foil.
Before initial use please remove this foil so that the remote control is ready for operation.
Press this button briefly to display the root level directory of DVD. Press and hold
this button to turn on or off the SUBWOOFER output.
In Radio mode, press this button repeatedly to switch between the five radio
bands: FM1 > FM2 > FM3 > AM1(MW1) > AM2 (MW2). In Disc Playback modes,
Press this button to see information about the disc currently in play.
Press this button to turn the unit ON, press and hold to turn the unit OFF. Press
briefly to select a desired work source.
In Disc Playback mode, press to pause playback. Press again to start where
playback stopped.
Press this button to turn off the audio. Press again to restore the sound to its
prior volume level.
When playing a Digital Video, pressing this button will open the TITLE menu
which is recorded on the Digital Video. When playing a VCD disc, press this button
to create a PBC (Playback Control) menu for the disc to assist in making playback
selections. In Radio mode, press and hold this button to start the Auto-Program
mode, during which the tuner will scan for all strong stations and assign them to
the radio preset buttons.
ress this button to Open/Close the operate monito. Long press it to adjust the
angle of monitor Upward/Downward.
For Digital Video discs which have alternate viewing angles encoded, when you
see the "angle mark" symbol advising you that these angles are available, longer
press this button to see them.Shortly press it button to increase the picture in
size.
Press repeatedly to cycle through the different equalizer curve resets you may
wish to use for enhanced listening. Press longer to switch the LOUDNESS function
ON and OFF .
In Disc Playback mode, press for fast forward playback.
This button is used to confirm selections and settings within many of the menus in
the OSD system.
In DISC mode, press it to reverse rapidly
Use to input numerical values during programming, with the GOTO
button, or to directly select a track to play. In Radio mode, (when the RDS
engaged,), 0 serves as TA function, 9 serves as the AF function.
This button is used with the other number buttons for use with two-digit number
entries. In BT menu, it serves as the hash button on your mobile handset.
Six numbered preset buttons store and recall stations for each band.