Usb Operation; In Usb Playback Mode - auna TC7-MVD-180 Bedienungsanleitung

USB OPERATION

Following the diagram below, connect your USB
device to the front panel USB port . If it is properly
connected, the device will be mounted and start
playing automatically.

IN USB PLAYBACK MODE

Touch the desired track to start play.
You can use the UP, DOWN, RIGHT,LEFT and ENTER
buttons to navigate and to select files to play.
Press the or skip to the next or last track.
Press the  or buttons for Fast Forward/Reverse.
REPEAT play modes are also available by repeatedly
pushing REPEAT until the desired mode is found.
Changing From USB to DISC Playback modes
If you are in USB Playback mode and wish to begin
playback of a disc already in the player, touch the
screen of the menu range to enter home menu,then
touch the " DISC" ICON to enter the DISC mode.
Changing From DISC to USB Playback Mode
If the disc present in the player is an Digital Video or
VCD or MP3/WMA or MP4 disc, touch the screen of
the menu range to enter the home menu, then
touch the "USB" ICON to enter the USB mode .
IMPORTANT NOTE:
To prevent damage to the USB device, do not
remove or disconnect it during playback. it is also a
good practice to remove the USB drive during disc
playback.
SD/MMC card OPERATION
The unit can support playback MP3/WMA/JPEG/MP4
and Divx format which are stored into SD and MMC.
INSERTING THE SD OR MMC CARD.
Press REL button to detachable the panel.
Insert the memory card into slot with label side
facing upward.
Note: the mini card slot for GPS only.
Press in till heard a "CLICK".
REMOVING THE SD OR MMC CARD
Press in till heard a "CLICK".
Remove the memory card.
Mode change to SD/MMC card
After a SD or MMC card was inserted, press the
MODE button repeatedly is allowing changing to
other modes.
Change DISC to SD/MMC card
See USB operation.
Change SD/MMC card to DISC
See USB operation.
Label
side
facing
upward