Control Panel - auna TC7-MVD-180 Bedienungsanleitung

Setting Audio Mode
In any modes, touch the "EQ" range on the touch
screen (or press the EQ button on remote control)
to select one of the preset sound modes:
ROCK/POP/ JAZZ/CLASSIC/USER .
The information will display in the monitor as follow
Reset Factory S ettings
RESET button is placed on the housing and must be
activated with either a ballpoint pen or thin metal
object.
The RESET button is to be activated for the
following reasons:
A. Initial installation of the unit when all wiring
is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.
Rear View Camera
When connecting the rear view camera the mirror
image of the rear view is auto- matically displayed
on the monitor
when you change the gear to the back position.
(Note: additional monitor can not display the
image.)

Control Panel

1. OPEN/AF BUTTON
To slide the monitor out and stand it
up or into the monitor slot, press this
button;
Long press this button to switch on or
off AF function. The AF symbol
appears in the display. Refer to the
part of the RDS function for details.
2. VOL KNOB & SEL BUTTON
In normal mode, VOL knob is used to
increase or decrease the volume.
Briefly press SEL button repeatedly to
switch between BASS,TRE,BAL,FADE,
COLOR,BRIGHT,CONTR, TINT and
VOL; Long press SEL button to switch
BT, then briefly press SEL button
repeatedly to switch between REG,
PI, TA, AF, LOUD,SWF, EQ, DX/LOCAL
(in radio mode), STEREO/MONO(in
radio mode), TIME 24H/12H, SET
CLOCK, BUZZ,EUR/USA FREQ, ANIMA
and BG; After switching a desired
item above, rotate VOL knob to set.