Dimplex VFE 20 Montage- Und Gebrauchsanweisungen Seite 47

Operation
9.2. Main menu
Other setting options are shown in the main menu.
Hold down the MENU key. The display initially

switches to the CHARGING menu. Continue to
hold the key (for approx. 3 seconds in total). The
display switches to the main menu.
Tap on the MENU key briefly again. The supple-

mentary heating symbol flashes.
Use the  keys to select one of the adjusters

described below:
A - Supplementary heating on/off
B - Timer (week program)
D - Frost protection temperature 7° C
E - Set the time and date
www.dimplex.eu
Supplementary heating
NOTE
The function set out below does not apply for wall-
mounted room thermostats.
NOTE
This function can only be used if a supplementary
heating (accessory) is installed.
Supplementary heating ON
Press and hold the MENU key for approx. three

seconds.
The display switches to the main menu.
Press the MENU key.

The SUPPLEMENTARY HEATING symbol flashes.
Press the ENTER key. OFF flashes.

Press the key. ON flashes.


Press the ENTER key. Switch-on duration flashes.

Define the switch-on duration with the

Press the ENTER key. Temperature flashes.

Use the
 

perature.
Press the ENTER key. Setting is complete.

Supplementary heating OFF
Press and hold the MENU key for approx. three

seconds.
The display switches to the main menu.
Press the MENU key.

The SUPPLEMENTARY HEATING symbol flashes.
Press the ENTER key. ON flashes.

Press the key. OFF flashes.


Press the ENTER key. Setting is complete.

NOTE
If the supplementary heating is controlled via a wall-
mounted room thermostat, the conversion set item
no. 459270.28.61 must be integrated.
2202/D
keys to set the desired comfort tem-
English
key.

EN-19