Herunterladen Inhalt Inhalt Diese Seite drucken

INVENTOR CB-WUI-20L Bedienungsanleitung Seite 23

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 97
FAN
Press the FAN button to select among the Low, Med or High fan speed. A light indicator will
illuminate separately for each fan speed selected.
• Low fan speed: When activated the indicator marked "Lo" is turned on. Select the
low fan speed for quite operation in order to enjoy ideal conditions.
• Medium fan speed: When activated the indicator marked "Med" will be turned
on. Select this mode for normal operation.
• High fan speed: When activated the indicator marked "Hi" is turned on. Select this
mode when immediate dehumidification is necessary, such as areas or rooms that
are unused for an extended period of time.
TIMER
Press the "TIMER" button to initiate the auto START or auto STOP function in combination with
the UP (˄) and DOWN (˅) buttons. The "TIMER" light indicator on the control panel will turn on.
• When unit is on, press the Timer button to activate the auto STOP function. When the unit is
off, press this button to activate the auto START function.
• Press the (˄) or (˅) button to change the time by 0.5 hour increments, up to 10 hours
or by 1 hour increments up to 24 hours. The control panel will then count down time
remaining until START or STOP.
• The time selected will be stored within 5 seconds and the main display will
automatically return to its previous state.
• Turning the unit ON or OFF at any time or changing the timers setting to
0.0 will terminate the Auto Start/Stop function.
• When the code "P2" appears on the led display, the Auto Start/Stop function will
be terminated.
The timer function can either be set to ON or OFF. Setting ON
and OFF simultaneously is not possible.
Fresh (IONIZER & UVC)
By pressing both the set humidity control buttons (˄) + (˅) continuously for 2 seconds the fresh
function will be selected during which both the ionizer and the UVC led will be on. The symbols
( ) and UV will appear on the led display. Ions will be released in the atmosphere to purify the
air and remove unpleasant and unhealthy particles. At the same time the Ultraviolet technology
of the UVC led will help to eliminate microorganisms such as germs, viruses, bacteria and fungi.
By pressing the buttons once again this function will be terminated.
EN
23

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis