Connecting The Hose - Miele APFD 200 Gebrauchsanweisung

Connecting the
hose
Quick-release
couplings
Connecting the ad-
apter
To supply the air regulator with compressed air, the hose must be
connected to the insert.
The quick-release couplings on the insert are fitted with protective
caps. The protective caps prevent wash water from collecting in
the couplings.
If wash water collects in the quick-release couplings, then the pres-
sure can force this into the air regulator when it is connected.
Unused quick-release couplings must therefore always be sealed
with protective caps.
Select the adapter with the same colour-coding as on the ring

holder.
Remove the protective cap from the quick-release coupling.

Insert the hose adapter into the quick-release coupling on the  in-

sert.
The collar on the coupling is pushed downwards in the process. .
As soon as the collar has snapped back, the hose is pressure-tight.
en - Areas of application
33