Safety Precautions; Installation Precautions; Operation Precautions - Mitsubishi SC-SL3NA-AE Anwenderhandbuch

Safety Precautions

Before starting to use the central control, read these "Safety precaution" carefully to ensure proper operation of the central control.
The safety precautions are classified as "
GER" indicate that improper handling could have serious consequences like death, serious injury, etc.
" CAUTION" might pose a serious problem, depending on the circumstances. Please observe these precautions with great
care, since they are essential to your safety.
Symbols which appear frequently in the text have the following meaning:
Strictly prohibited.
When you have read the instruction manual, please keep it near at hand for consultation. If someone else takes over as
operator, make sure that the manual is also passed on to the new operator.

❚ INSTALLATION PRECAUTIONS

The central control must be installed by your dealer or a qualifi ed professional.
It is not advisable to install the central control yourself, as faulty handling may cause electric shock or fi re.
Make sure to perform grounding work.
Do not connect the ground wire to any gas pipes,
water pipes, lightning conductors or a ground wire
connected to telephones. Incomplete grounding may
cause electric shock.

❚ OPERATION PRECAUTIONS

If the central control is damaged with water due to a
natural disaster such as a fl ood or a typhoon, consult
your dealer.
Operating the central control under such conditions
may lead to failure, electric shock and/or fi re.
Do not handle with wet hands.
This may cause an electric shock
or failure.
Discharging static electricity through the unit could cause a break-down.
Before starting operation, touch a grounded metal object and discharge any static electricity.
If the screen freezes frequently, it is recommended to attach an antistatic sheet or similar object.
DANGER" and " CAUTION". Precautions as shown in the column "
Observe instructions with
great care.
DANGER
CAUTION
DANGER
If the central control is under abnormal conditions, stop
the operation, turn the power supply switch off and consult
your dealer.
CAUTION
Do not pull the connecting wire.
If the core wire is disconnected,
it could cause a short-circuit.
– 2 –
Depending on the place of installation, a leakage
breaker may be necessary.
If a leakage breaker is not installed, electric shock
may happen.
Consult your dealer.
Continuing operating the central control under abnormal
conditions may lead to failure, electric shock and/or fi re.
Do not wash the central control with
water.
DAN-
Provide positive earthing.
It may cause electric shock or
failure.