Multiple Groups Operation Settings - Mitsubishi SC-SL3NA-AE Anwenderhandbuch

3. Press the CHANGE button.
The screen for basic group settings is displayed. Make the settings or changes.
Note
• To display the units in a group, press the UNIT LIST button.
• To show all blocks, press the ALL BLOCKS button.
• Ones which are surrounded by orange frames are the items which operations from the remote controller
are prohibited in the group settings.
• If the MENU button is pressed, the MAIN MENU is displayed.

Multiple Groups Operation Settings

This section shows how to operate multiple groups in a same block.
1. Press the ALL BLOCKS button on the MAIN MENU.
2. Press the block you wish to set.
The GROUP (PANEL) screen is displayed.
3
4
<When running and stopping multiple groups>
3. Press the panels of the groups for which settings are to be made (multiple groups can be selected).
The panel frame turns blue.
When you want to cancel, please press the panel of the group again.
4. To run units
The selected group starts running.
To stop units
The selected group stops running.
When you do not want to set, press the No button.
<When making settings and changes on multiple groups>
3. Press the panels of the groups for which settings or changes are to be made (multiple groups can
be selected).
The panel frame turns blue.
When you want to cancel, please press the panel of the group again.
4. Press the CHANGE button.
The screen to change groups is displayed. When the screen changes, no items are selected (the tempera-
ture setting is blank). Set only the items that are to be set or changed.
[GROUP (PANEL) screen]
Press the RUN button, and press the Yes button on the confi rmation screen.
Press the STOP button, and press the Yes button on the confi rmation screen.
Page 24
Page 9
Page 7
Page 7
[Individual lock/unlock settings enabled in Function
Setting]
This function can be applied to the indoor units,
6
which are the model KXE4 or later, and to the
5
remote controller, which is the model RC-E1 or
later.
– 18 –
Page 16
4