Operation; Time & Date Setting; Group Defi Nition - Mitsubishi SC-SL3NA-AE Anwenderhandbuch

Operation

Attention
A static electric discharge to the unit could cause a break-down.
Before performing operations, touch a grounded metal object and discharge any static electricity.
Time & Date Setting
1. Press the MENU button and then press the SYSTEM CONFIG. button.
2. Press the TIME&DATE SETTING button on the SYSTEM CONFIGURATION screen.
3
3. Press the Year, Month, Day and Time buttons.
Input the current time and date.
4. Press the SET button, and press the Yes button on the confi rmation screen.
The specifi ed date and time are set at the 00 seconds. When you do not want to make the setting, press the
No button.
Note
• If the BACK button is pressed, it will return you to the SYSTEM CONFIGURATION screen.
• It is unnecessary to reset the time and date for power outages lasting less than 48 hours.
Group Defi nition
1 Selecting the groups to register and display the registered units
1. Press the SYSTEM CONFIG. button on the MAIN MENU.
page 7
2. Press the GROUP DEFINITION button on the SYSTEM
CONFIGURATION screen.
The GROUP DEFINITION screen is displayed.
3. Select a group name.
When adding a group, press an empty group name area. When changing the settings for a registered
group, press that group name. The selected group is reverse highlighted. To change the page, press the
PREV or NEXT button.
[TIME & DATE SETTING screen]
page 26
page 8
[Initial GROUP DEFINITION screen]
Initial GROUP DEFINITION screen may vary
according to the transmission method.
(Example for previous setting)
3
(Example for new setting)
4 One indoor unit is registered with one group
on the initial screen previously.
When registering the indoor unit to other
groups, register it with other group after de-
leting it from the group, and moving it in the
list of ALL UNITS.
– 11 –
page 7
page 8
4
1 - 00
SuperLink No. Unit address
005
Unit address