Ayce YWD-10 Gebrauchsanweisung Seite 137

INTEGRATION
This allows the unit to be integrated with your favourite home automation hardware such
as Google Home and the Amazon Echo.
TROUBLESHOOTING
Do not repair or disassemble the air conditioning. Unqualified repair will invalidate the
warranty and may lead to failure, causing injuries and property damage. Only use it as
directed in this user manual and only perform operations advised here.
Problem
The air conditioner
does not work
The cooling or
heating effect
is poor
Reasons
There is no electricity.
In cooling mode, the room temperature
is lower than the desired temperature;
in heating mode, the room temperature
is higher than the desired temperature.
In dehumidification (dry) mode, the
ambient temperature is low.
There is direct sunlight.
Doors or windows are open.
The filters screen is dirty.
The air inlet or outlet is blocked.
Select "More Services", you could integrate
with third-party voice services, pls refer to
the left picture.
Solutions
Check the unit is plugged in, and the
socket is working normally.
Adjust the desired room temperature.
Ensure that the room temperature
is above 17°C for dry mode.
Use curtains to reduce heat from
the sun.
Close doors and windows.
Clean or replace the filter screen.
Clear obstructions; make sure the unit is
installed as per the instructions.
GB
136 137