Maintenance And Cleaning; Disposal - Parkside Performance PKHAP 20-Li A1 Originalbetriebsanleitung

Maintenance and cleaning

WARNING! RISK OF INJURY!
Always switch the appliance off and
remove the battery before carrying out
any work on the appliance .
The appliance is maintenance­free .
■ The appliance must always be kept clean, dry
and free from oil or grease .
■ Use a soft, dry cloth to clean the housing .
Never use petrol, solvents or cleansers which
can damage plastic .
■ Never allow liquids to get into the appliance .
■ Clean the tool holder q regularly .
♦ To do this, pull the locking collar w backwards
and pull the dust protector cap off the tool
holder q .
♦ Before fitting a tool into the tool holde q,
grease it lightly .
■ If a lithium­ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The optimum storage
environment is cool and dry .
NOTE
► Replacement parts not listed (such as batteries,
switches) can be ordered via our Service
hotline .
WARNING!
■ If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards .
PKHAP 20-Li A1

Disposal

The packaging is made from environ­
mentally friendly material and can be
disposed of at your local recycling
plant .
Do not dispose of power tools
in your normal domestic waste!
European Directive 2012/19/EU
requires that worn­out power tools be
collected separately and recycled in an environ­
mentally compatible manner .
Do not dispose of batteries in
your normal household waste!
Defective or worn­out rechargeable
batteries must be recycled according
to Directive 2006/66/EC . Take the battery pack
and/or appliance to a nearby collection facility .
Please consult your local authorities regarding
suitable disposal of worn out power tools/battery
packs .
Dispose of the packaging in an envi­
ronmentally friendly manner . Note
the labelling on the packaging and
separate the packaging material
components for disposal if necessary . The pack­
aging material is labelled with abbreviations (a)
and numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites .
Your local community or municipal
authorities can provide information on
how to dispose of the worn­out product .
GB │ MT │ 51 ■