Connect Power; Pair Up With The Subwoofer - Grundig DSB 2000 Bedienungsanleitung

CONNECTION __________________________
nected to the HDMI ARC socket on the TV.
Method 2: Standard HDMI
• If your TV is not HDMI ARC-compliant, connect
your soundbar to the TV through a standard
HDMI connection.
Use an HDMI cable (included) to connect the
soundbar's HDMI OUT socket to the TV's HDMI
IN socket.
Use an HDMI cable (included) to connect the
soundbar's HDMI IN (1 or 2) socket to your exter-
nal devices (e.g. games consoles, DVD players
and blu ray).
Use the OPTICAL Socket
• Remove the protective cap of the OPTICAL
socket, then connect an OPTICAL cable (inclu-
ded) to the TV's OPTICAL OUT socket and the
OPTICAL socket on the unit.
Use the COAXIAL Socket
• You also can use the COAXIAL cable (not inclu-
ded) to connect the TV's COAXIAL OUT socket
and COAXIAL socket on the unit.
• Tip: The unit may not be able to decode all
digital audio formats from the input source. In
this case, the unit will mute. This is NOT a de-
fect. Ensure that the audio setting of the input
source (e.g. TV, game console, DVD player,
etc.) is set to PCM or Dolby Digital (Refer to
the user manual of the input source device for
its audio setting details) with HDMI / OPTICAL
/ COAXIAL input.
Use the AUX Socket
• Use a RCA to 3.5mm audio cable (not inclu-
ded) to connect the TV's audio output sockets
to the AUX socket on the unit.
• Use a 3.5mm to 3.5mm audio cable (included)
to connect the TV's or external audio device
headphone socket to the AUX socket on the
unit.
34 ENGLISH

Connect Power

Risk of product damage!
• Ensure that the power supply voltage corres-
ponds to the voltage printed on the back or the
underside of the unit.
• Before connecting the AC power cord, ensure
you have completed all other connections.
Soundbar
Connect the mains cable to the AC~ socket of
the main unit and then into a mains socket.
Subwoofer
Connect the mains cable to the AC~ socket of
the Subwoofer and then into a mains socket.
Note:
• If there is no power, ensure the power cord
and plug are fully inserted and the power is
turned on.
• Power cord quantity and plug type vary by re-
gions.

Pair up with the subwoofer

Note:
• The subwoofer should be within 6 m of the
Soundbar in an open area (the closer the bet-
ter).
• Remove any objects between the subwoofer
and the Soundbar.
• If the wireless connection fails again, check if
there is a conflict or strong interference (e. g.
interference from an electronic device) around
the location. Remove these conflicts or strong
interferences and repeat the above procedu-
res.
• If the main unit is not connected with the sub-
woofer and it is in ON mode, the Pair Indicator
on the subwoofer will blink slowly.