Residual Risks; Package Contents - DeWalt D25980 Originalanweisungen

EN GLI SH
• Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
• Do not strike jammed accessories with a
hammer to dislodge them. Fragments of metal
or material chips could dislodge and cause
injury.
• Always switch off the tool when work is finished
and before unplugging.
• Do not recondition accessories yourself. Chisel
reconditioning should be done by a qualified
specialist. Improperly reconditioned accessories
could cause injury. Only slightly worn
accessories can be resharpened by grinding.

Residual Risks

The following risks are inherent to the use of
demolition hammers:
- Injuries caused by touching the hot parts of the
tool.
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
- Impairment of hearing.
- Risk of squeezing fingers when changing the
accessory.
- Health hazards caused by breathing dust
developed when working in concrete and/or
masonry.
- Physical trauma due to inappropriate lifting and
carrying of heavy equipment.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. 1)
The Date Code (q), which also includes the year of
manufacture, is printed into the housing.
Example:
2009 XX XX
Year of Manufacture
24

Package Contents

The package contains:
1 Demolition hammer
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off switch
b. Side handle(s)
c. Tool retainer
d. Tool holder
OPTIONAL ACCESSORIES (FIG. 3)
Various types of 28 mm hex. chisels are available as
an option.
e. Pointed chisel (DT6927)
f. Cold chisel (DT6929)
g. Scaling tool (DT6932)
h. Spade chisel (DT6928)
i. Asphalt cutter (DT6934)
j. Driver ground rod (DT6933)
k. Shank tamper (DT6935)
l. Plate tamper (DT6936)
Consult your dealer for further information on the
appropriate accessories.
INTENDED USE
D25980 demolition hammer has been designed for
professional heavy duty demolition, chipping and
chasing applications in concrete, brick, stone and
other masonry materials.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These demolition hammers are professional power
tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.