Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OBJ_BUCH-302-005.book Page 63 Tuesday, June 9, 2009 2:19 PM
Sawing Profile Strips/Mouldings (Floor and Ceiling Strips)
Profile strips/mouldings can be sawn in two dif-
ferent ways:
– Placed against the fence
– Lying flat on the saw table.
Floor Strips/Mouldings
The following table contains instructions for sawing floor strips/mouldings.
Settings
Vertical bevel angle
Floor strip/moulding
Inner corner Horizontal mitre
angle
Positioning of
workpiece
The finished
workpiece is lo-
cated...
Outer
Horizontal mitre
corner
angle
Positioning of
workpiece
The finished
workpiece is lo-
cated...
Bosch Power Tools
Always make trial cuts with the mitre angle set-
ting first on scrap wood.
Placed
against
the fence
0°
Left side
Right side
45° left
45° right
Bottom edge
Bottom edge
on saw table
on saw table
... to the left of
... to the right
the cut
of the cut
45° right
45° left
Bottom edge
Bottom edge
on saw table
on saw table
... to the right
... to the left of
of the cut
the cut
English | 63
Lying flat
on the
saw table
45°
Left side
Right side
0°
0°
Upper edge
Bottom edge
against the
against the
fence
fence
... to the left of
... to the left of
the cut
the cut
0°
0°
Bottom edge
Upper edge
against the
against the
fence
fence
... to the right
... to the right
of the cut
of the cut
1 609 929 U05 | (9.6.09)
Werbung
Inhaltsverzeichnis
