Sharp UA-KCP100E Bedienungsanleitung Seite 13

2.
Follow instructions on the App.
• If the Wi-Fi Indicator lights up after the
notification sound, the connection is
successfully completed.
Light up
Tap "NEXT".
3 CONNECTION BETWEEN THE
AIR PURIFIER AND A SMART
DEVICE
1.
Tap "Pair" for the air purifier you
would like to pair.
(MODEL NAME)
• If you do not see the screen above, tap
" " at the "Home" screen, and select
"Pairing" "Already connected with a
router".
2.
Follow instructions on the App.
• If the Wi-Fi Indicator lights up after the
notification sound, the connection is
successfully completed.
Light up
The INITIAL SET UP is completed.
How to set Wi-Fi ON / OFF after
completing the INITIAL SET UP
If you would like to turn the Wi-Fi
♪
OFF:
NOTE
• Turning the Wi-Fi off will result in not being able
to control the air purifier with the designated
App.
If you would like to turn the Wi-Fi ON
again :
(How to restore the Wi-Fi connection to the
original network.)
The Wi-Fi Indicator will flash after you press the
Wi-Fi Button. And within about 3 minutes, you will
hear four short beeps. Some time after this beep
sounds, the Wi-Fi Indicator lights up and the Wi-Fi
connection will be restored to the original network.
The designated App can now be used again to
control the Air Purifier.
NOTE
• Wi-Fi ON / OFF can also be set from
"
(Page 14, 16)
In this case, Wi-Fi connection with the router
will be automatically restored.
• Reconnection to the Wireless Router may take
a few minutes to complete, after turning Wi-Fi
on again.
♪
EN-11
♪
～
Press for 3 sec.
♪
Press
for 3 sec.
: Wi-Fi adapter ON/OFF".
Goes off