BEFORE FIRST USE
FILTER INSTALLATION
• To maintain the quality of the filter, it is installed
in the product and packaged in a plastic bag.
• Be sure to stop operation
and unplug the product
before filter installation or
replacement.
1.
Remove the Back Panel.
2.
Take out the filters from the plastic
bag.
3.
Install the filters in the correct order
as shown.
Back Panel
HEPA Filter
Deodorizing Filter
Tag
4.
Install the Back Panel.
NOTE
• If the Back Panel is not installed correctly,
"
" will be displayed and the operation will
be stopped. (Page 22)
• When replacing the filters, making a memo of
the start of use date is recommended.
• Do not operate the product without the filters.
EN-8
Click