Sharp UA-KCP100E Bedienungsanleitung Seite 19

Function
Confirmation of
MAC address
Display Wi-Fi
network status
1.
Select " " by following Steps 1 - 3 on page 14.
2.
Press "Clean Ion Shower" Button to display MAC address.
♪ ♪
3.
Complete
♪
1.
Select " " by following Steps 1 - 3 on page 14.
2.
After displaying "
Wi-Fi adapter will be displayed.
Connection is stable
Wi-Fi adapter is off
Please turn on Wi-Fi adapter.
Router is not registered
Please perform the Wi-Fi connection with the router.
Link settings with the App is not performed
Please perform the link setting with the smart device.
Wi-Fi adapter network error
Please turn off Wi-Fi adapter and turn on again after a while.
Network error between the air purifier and the router
Please confirm the network status of the router.
Network service error
Please turn off the air purifier and confirm the internet status, then try
again.
3.
Complete
♪
EN-17
Setting
For example:
In case MAC address is "12:34:56:AB:CD:EF".
♪ ♪ ♪
" for a few seconds, network status of
♪ ♪ ♪
～