Sharp UA-KCP100E Bedienungsanleitung Seite 11

REFILLING THE HUMIDIFYING TRAY
• When humidifying, fill the Humidifying Tray with
water.
• When not humidifying, discard the water in the
Humidifying Tray.
1.
Pull out the
Humidifying Tray.
NOTE
• When removing and installing the
Humidifying Tray, be careful not to spill any
water.
2.
Fill the Humidifying Tray with
tap water using method "A" or "B".
A
B
NOTE
• The Humidifier Float will float up when tray
is filled with water.
• Slowly fill it with water to avoid splashing.
• Do not fill beyond the "FULL" indicator.
• When carrying the Humidifying Tray, hold it
with both hands or grip the Tray Handle.
• Clean the Humidifying Tray if it becomes
dirty or there is a noticeable odour.
3.
Carefully install the
Humidifying Tray.
About Tray Handle
• When holding and carrying the
Humidifying Tray, use tray handle
• When cleaning the Humidifying Filter,
you can turn the Tray Handle down on
its side.
• After cleaning, install the Tray Handle
back in its original position.
NOTE
• Return the Tray Handle to its original
position before installing.
EN-9
Tray Handle