Led Indicators - Qwic MIRA Bedienungsanleitung

Tips
First insert the charging plug into the e-bike or battery socket before connecting the
charger the mains. Don't forget to disconnect your charger when not in use. Disconnect
the (travel) charger from both battery and socket when the battery is full.
It is normal for any charger or battery to get warm during charging, so do not cover
them up with anything while charging.
Keep your charger clear. Unplug the power cord and clean the charger with a dry
cloth to remove dust and dirt. The charger cannot be self-repaired in case of any
defects or damages. Please contact your dealer regarding this matter.

4.4. LED indicators

On the top side of the battery, you will find a battery indicator and a status
button. When connected to the charger, the indicator displays the charging
status with a light (see charging indicator).
If no charger is connected, shortly pressing the status button will light up the
LEDs and inform you about the current state of charge. While charging the
battery the LED indicator on the travel charger (accessory) will provide the
following visual information about the state of charge (see charger indicator
(no charger connected).
Function
No battery present
Battery fully charged
Battery charging
Mira
18
4. THE BATTERY
LED status
Green
Green
Red
4.4. LED indicators
Charging indicators:
Battery charging to 20%
Battery charging to 40%
Battery fully charged
Charging indicator (no charger connected)
100% charge
20% charge
5% charge (red light)