Aux Mode - Niceboy RAZE NEON Bedienungsanleitung

POWER ON / OFF
To turn the speaker on or off, press and hold button (5) for 3 seconds.
*If the speaker is left inactive, it will turn off automatically after 15 minutes to save power.
CONNECTING TO A DEVICE
1. Press and hold the on/off button (5) for 3 seconds to turn the speaker on. The speaker is
now in pairing mode for wireless connectivity. Pairing mode is indicated by the flashing of
the blue operating LED inside button (5).
2. Activate Bluetooth on your device. Select "Niceboy RAZE Neon" in the list of available
devices.
3. The device will connect to the speaker. A successful pairing is indicated by a tone and the
blue operating LED (5) lighting up.
*When switched on again, the speaker automatically connects to the last paired device.
*End pairing by double-pressing button (7).
PLAYBACK
To start or pause a track, short-press button (5). Control the volume by short- or long-pressing
button (1) or (2). Short-pressing button (4) or (6) skips to the next or previous track.

AUX MODE

1. Plug the enclosed 3.5 mm jack cable into the audio port (8); the speaker will automatically
switch to the corresponding mode.
2. Control what music the speaker plays using the device the speaker is connected to.
Control the speaker's volume by long-pressing button (1) or (2). Short-pressing button (4)
or (6) skips to the next or previous track.
USB FLASH DRIVE AND MICRO SD CARD
Insert a data storage device into the corresponding port (9), (10).
The speaker automatically switches to playback mode, indicated by a tone.
To start or pause a track, short-press button (5). Control the speaker's volume by long-pressing
button (1) or (2). Short-pressing button (4) or (6) skips to the next or previous track.
13