Meec tools 015271 Bedienungsanleitung Seite 25

MAINTENANCE
FILTER CLEANING
Clean the filter at regular intervals when the product is in use.
Squeeze out any slurry from the filter unit and rinse with
fresh water. Replace the filter if the water from the outlet
is muddy.
CLEANING THE PUMP HOUSING AND IMPELLER
Clean the pump when slurry has accumulated.
1. Remove the impeller casing and carefully pull out the
magnetic impeller and then the ceramic shaft.
NOTE:
The magnetic shaft is delicate – do not use force.
2. Wash the parts with water.
3. Replace the ceramic shaft first, and then the impeller.
The magnetic impeller fits automatically in place.
4. Adjust the shaft and fit the impeller casing.
5. Carefully align the impeller casing to avoid leakage.
6. Fit the filter unit and filter casing.
7. The product is now ready to use.
STORAGE
Empty all the water from the product before the winter to avoid
malfunctioning as a result of freezing or the accumulation of slurry.
EN
25