Asus WL-700gE Schnellstartanleitung Seite 12

4. Click Advance Setting and select Basic. If you want to
disable encryption, set Wireless Mode to Auto and WEP
Encryption to None. Click Apply and skip to step 6. If you
want to enable encryption, go to step 5.
6. Double-click the 700gE share folder short cut on your desktop to access WL-700gE share space. Copy the files
you want to share into the share folder.
How to download the shared documents
1. Connect your computer to WL-700gE, open My Network place and
click view workgroup computers (make sure WL-700gE and your
computer are within the same workgroup, the default workgroup of
WL-700gE is WORKGROUP).
The default workgroup setting of WL-700gE is Workgroup.
If your computer and WL-700gE are not within the
same workgroup, you cannot find WL-700gE from your
computer. Set WL-700gE within your workgroup by
modifying the workgroup settings in Share Management
-> Windows Setup page.
5. To enable encryption protection, set Authentication method
to WEP 64-bits, WEP 128-bits, or WPA. For WEP encryption,
you need to input four WEP keys (10 hexadecimal digits for
WEP-64bits; 26 digits for WEP-128bits). You can also let the
system generate the WEP keys by inputting a Passphrase.
Take down all keys and passphrase in your note.
ASUS Wireless Router 11