Troubleshooting - Asus WL-700gE Schnellstartanleitung

3. Troubleshooting

1. Power ON the WL-700gE Wireless Router and make sure
the LED indicators light up normally.
3. Ping WL-700gE at your computer. Click Start on the desktop
and select Run..., type cmd and press OK. Then type ping
192.168.1.1 and press Enter. If ping times out, it means
the router could not been reached by your computer. You
need to reset the the router if you do not remember the IP
address.
5. Check whether you can access the Web configuration page
of WL-700gE and set up features via Web interface.
2. Make sure the ASUS Wireless Router Utility is correctly
installed.
4. Press the RESET button on the rear panel for more than 5
seconds.
6. Check whether you can configure the wireless router and
access Internet via wireless.
ASUS Wireless Router 22