Water Inlet; Drainage; Dispensing - Miele PFD 400 Installationsplan

en - Technical data

Water inlet

Max. water temperature cold water
Max. water temperature hot water
Max. water hardness
Max. water hardness
Water connection pressure
Flow rate
On-site threaded union (flat seal)
Connection hose length
Connection hose extension *
* Optional accessories

Drainage

Max. water temperature
PFD 400, PFD 401:
PFD 402:
PFD 404, PFD 405:
PFD 407:
Drain hose length
Max. drain hose length
Max. delivery head
Max. transient flow rate
Hose inner diameter (Ø)
On-site hose sleeve (Ø x length)

Dispensing

Integrated dispenser pump (DOS)
Max. delivery head
Length of dispenser hose, back of appliance to suction lance
External dispenser pump
Max. delivery head
Length of dispenser hose, DOS module to suction lance
Length of dispenser hose, back of appliance to DOS module
Length of power cable, back of appliance to DOS module
28
20 °C
65 °C
10.71 mmol/l
60 °dH
40-1000 kPa
7.5 l/min
3/4 inch
1.5 m
1.5 m
70 °C
80 °C
85 °C
93 °C
1.5 m
4 m
1 m
16 l/min
22 mm
22 x 30 mm
1.5 m
approx. 1.8 m
1.5 m
approx. 1.8 m
approx. 2.8 m
approx. 2.8 m