Auto Operation - LG AMNH126VEA0 Benutzerhandbuch

Operating Instructions

Auto Operation

ON
DURING AUTO OPERATION:
o You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule.
o If the system is not operating as desired, manually switch to another mode. The system will not
automatically switch from the cooling mode to the heating mode, or from heating to cooling, then you must
set the mode and the desired temperature again.
o During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down
automatically. If you want to stop auto-swing, press the chaos swing button again.
12 Multi Type Air Conditioner
1
Press the Start/Stop button.
The unit will respond with beep
sound.
Open the door on the Remote Controller. To select Auto
2
Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
Cooling
(Cooling Only� (Heat Pump�
model) model)
The temperature and fan speed are automatically set by the
3
electronic controls based on the actual room temperature.
If you want to change the set temperature, press the Room
Temperature Setting buttons. The set temperature will be
changed considering room temperature.
Auto Healthy�
Dehumidification
To raise the temperature
To lower the temperature
Heating�
(Heat pump model only)