Creating Scale Users In The "Beurer Healthmanager Pro" App; Alternative Method: Creating Scale Users Without The App; Weighing Yourself - Beurer Signature Line BF 405 Gebrauchsanweisung

5.2 Creating scale users in the "beurer HealthManager Pro" app

The scale has 8 memory spaces for different scale users, enabling you to save the various members of your
family, for example. You can use the "beurer HealthManager Pro" app to conveniently set up the individual
app users and their corresponding scale user via your smartphone. To do so, proceed as follows:
1. Scan the QR code with your smartphone and install the "beurer HealthManager Pro" app.
2. Launch the "beurer HealthManager Pro" app and follow the instructions.
3. When you reach the end of the instructions, you will be prompted to step onto the scale to take the initial
measurements (this will enable the scale to automatically detect the different users later on). Step onto the
scale once the display

5.3 ALTERNATIVE METHOD: Creating scale users without the app

Alternatively, you can also create a scale user directly on the scale without using the app. To avoid dupli-
cate users, do not create a scale user directly on the scale if you have already created that scale user
using the app. This process is not required if the scale has already been connected to the app.
1. Insert the batteries ("USE APP" will flash on the display
2. Place the scale on a stable surface.
3. Press the SET button
4. Set the current date (year, month, day) and time. Confirm each setting with the SET button
play shows "0.0".
1
5. Press the SET button
6. Use the button
tion with the SET button
7. flashes on the display. Use the
8. "170" flashes on the display. Use the
9. The year, then the month, then the day flash on the display
and day of birth. Confirm your entry with the SET button
10. "3" flashes on the display
exercise (considered over the long term). (1 = none, 2 = low, 3 = medium, 4 = high, 5 = very high/athletic).
Confirm your entry with the SET button
11. "0.0" and the user symbol appear on the display

5.4 Weighing yourself

1. Step onto the scale barefoot. Stand still on the electrodes
weight evenly. The scale switches on automatically.
2. Your body weight appears on the display
then appear automatically. If the scale has detected several possible scale users, use the
select the correct one and wait 3 seconds. Step off the scale.
3. The following health values will then appear one after the other.
Body mass index (a healthy value is 18.5 - 25)
Body fat percentage (a healthy value is 16 - 28% for women and 11 - 23% for men)
Body water content in % (a healthy value is >45% for women and >50% for men)
Muscle percentage (a healthy value is 27 - 43% for women and 37 - 57% for men)
Mineral content of the bone mass in kg (there are no recognised recommendations for this; the
mineral content of the bones does not contain any organic substances such as proteins or cells; it
may vary due to factors such as weight/height/age/gender)
Scan here to access the
"beurer HealthManager Pro" app
shows the scale user (e.g. "U: 1") and "0.0".
1
.
3
.
3
to select the scale user you need (you can select from U: 1 to 8). Confirm your selec-
4
.
3
button
button
. Use the
1
).
1
to set the gender. Confirm your entry with the SET button
4
to set the height. Confirm your entry with the SET button
4
. Use the
1
.
3
/ button to set your activity level based on how much you
2 4
.
3
. Take the initial measurement.
1
with both legs, making sure to distribute your
5
. The scale user detected (e.g. "U: 1" for scale user 1) should
1
14
until the dis-
3
button to set the year, month
4
button
.
3
.
3
to
4