Usage; Prerequisites For Taking Measurements Correctly; Creating Scale Users In The "Beurer Healthmanager Pro" App; Alternative Method: Creating Scale Users Without The App - Beurer BF 500 Super Black Edition Gebrauchsanweisung

5. USAGE

5.1 Prerequisites for taking measurements correctly

• Place the scale on a level and stable surface (see Figure
• Wherever possible, weigh yourself at the same time every day (ideally in the morning), after having been
to the toilet, on an empty stomach and without clothing.
• To determine your body fat, always stand barefoot on the electrodes
• Stand upright and still throughout, from the weight measurement through to the body fat measurement.
Ensure that your weight is evenly distributed.

5.2 Creating scale users in the "beurer HealthManager Pro" app

The scale has 8 memory spaces for different scale users, enabling you to save the various members of your
family, for example. You can use the "beurer HealthManager Pro" app to conveniently set up the individual
app users and their corresponding scale user via your smartphone. To do so, proceed as follows:
1. Scan the QR code with your smartphone and install the "beurer HealthManager Pro" app.
2. Launch the "beurer HealthManager Pro" app and follow the instructions.
3. When you reach the end of the instructions, you will be prompted to step onto the scale to take the initial
measurement (for subsequent automatic personal recognition if within +/- 3 kg). As soon as a scale user
(e.g. "U: 1") and "0.0" appears in the display
Note on multi-user usage:
Create a separate app user for each scale user (in the same or on another smartphone/tablet with "beurer
HealthManager Pro" app).
If the same scale is used by several app users, the device must be added in the app for each of them during
setup. A new user is automatically created on the scale (e.g. U:2).

5.3 ALTERNATIVE METHOD: Creating scale users without the app

Alternatively, you can create a scale user directly on the scale without using the app. Do not create a scale
user directly on the scale if you have already created that scale user using the app. This process is not
required if the scale has already been connected to the app.
1. Remove the battery insulating strip from the battery compartment
in display ).
1
2. Place the scale on a stable surface.
3. Press the SET button
4. Set the current date (year, month, day) and time. Confirm each setting with the SET button
play shows "0.0".
1
5. Press the SET button
6. "Unit" appears in display
7. "USEr" appears in display
U: 1 to 8). Confirm the selection with SET button
8. flashes on the display. Use the
9. "170" flashes on the display
button .
3
10. The year, then the month, then the day flash on the display
and day of birth. Confirm your entry with the SET button
Scan here to access the
"beurer HealthManager Pro" app
.
3
.
3
, select with /
1
. Use the button
1
button
4
. Use the
1
).
A
, step onto the scale.
1
6
button and confirm with SET button
2 4
to select the scale user you need (you can select from
4
.
3
to set the gender. Confirm your entry with the SET button
button to set the height. Confirm your entry with the SET
4
. Use the
1
.
3
15
on the scale.
5
or insert batteries ("USE APP" flashes
3
button to set the year, month
4
until the dis-
3
.
.
3