Control Panel Functions; Ice Making; Cleaning Function - Klarstein ALBARON SUPREME Bedienungsanleitung

EN
POWER
SELECT

CLEANING FUNCTION

20

CONTROL PANEL FUNCTIONS

CLEAN
indicator light
SMALL ICE
indicator light
LARGE ICE
indicator light
SELECT
button
Plug in the power and the machine is in standby mode. Press the POWER button.
The "POWER" indicator light is always being on, then the machine enters the
operating state and the default to mode is large ice. The "LARGE ICE" indicator
light is always on, the ice block will be made automatically. After the ice making is
completed, the deicing will be carried out, and then the ice shoveling function will
be entered, and so on.
Plug in the power, turn on power switch and press the SELECT button to select
large ice, small ice and cleaning mode. Select any function, the corresponding
function indicator light flashes for 5 seconds, and then automatically confirms and
switches to the function, and the corresponding function indicator is always on.
In standby mode, the SELECT button is invalid for this operation. When the indoor
temperature is lower than 15 ℃, small ice is recommended. When the indoor
temperature is higher than 30 ℃, large ice is recommended.
Plug in the power, press on the POWER button turns on the machine, then press
the SELECT button to switch to the cleaning function, and the product cleaning
function starts. The POWER indicator light and CLEANING indicator light are always
on. Do not disconnect the power supply during the cleaning. After the cleaning,
the product automatically enters the standby mode.
ADD WATER
indicator light
ICE FULL
indicator light

ICE MAKING

indicator light
POWER
button