Operation Of Unit - elero Junior 1 Montageanleitung

Installation
Adjustment of limit switch "ejected" (setting screw 1)
Stroke reduction:
Stroke reduction:
Tab. 10 Adjust setting screw 1
Adjustment of limit switch "retracted" (setting screw 2)
Stroke reduction:
Stroke reduction:
Tab. 11 Adjust setting screw 2
4.4.3

Operation of unit

CAUTION
Damage to the device due to wrong operation.
• The thermal protection switch must not be used as a regular overload swit-
ching device.
• Fast polarity reversal of the traversing direction of the drive is not permissi-
ble.
• The drive must come to a complete standstill before changing the direction of
movement (for version with rated voltage 230 V 1 AC, 50 Hz)..
Turn in direction of "–"
MINUS
Turn in direction of "+"
PLUS
Turn in direction of "–"
MINUS
Turn in direction of "+"
PLUS
Limit switch position is moved
in direction of "retracted".
(Piston rod ejects less no-
tably)
Limit switch position is moved
in direction of "ejected".
(Piston rod ejects further)
Limit switch position is moved
in direction of "ejected".
(Piston rod retracts
less notably)
Limit switch position is moved
in direction of "retracted".
(Piston rod retracts
further)
27