Information Relating To The Self-Locking Facility - elero Junior 1 Montageanleitung

Product description
3.3.2

Information relating to the self-locking facility

WARNING
Danger of injury through loss of the self-locking facility.
Crushing and fatal injuries are possible.
• Use device with a brake.
CAUTION
Possible damage to the device or customer's machine through loss of the self-
locking facility.
• Use device with a brake.
With the devices it is differentiated between dynamic and static self-locking. Dy-
namic self-locking arises from movement and static self-locking when the device
is at a standstill. The self locking facility on the devices is dependent on various
factors, e.g.:
• Flight angle of the spindle and nut
• Surface roughness of the flanks of the spindle and nut
• Running speed
The self-locking facility can be negatively influenced by a multitude of factors,
e.g. by:
• Shocks and vibrations
• Loads
• Heating
A theoretically self-locking spindle is no replacement for a brake. For this reason
the assumption of any warranty obligations relating to self-locking is excluded.
Self-locking is NOT for the purpose of fulfilling any safety-related properties.
In order to minimize any further dangers, observe the duty of care that is normal
for technical products.
14