DeLonghi Pinguino F14 Betriebsanleitung Seite 17

5751004700EX 26-07-2002
AIR CONDITIONING WITH INSTALLATION
For more efficient use Pinguino can also be
semi-permanently installed
To install, proceed as follows:
• Make a hole in an outside wall or through
the pane of a window. Check the height
and dimensions given in figure D
in a window in the
pane wood sill of
a window
D
9:08 Pagina 17
S e t t i n g u p
in the wall: for
optimum results,
insulate the sec-
tion of the wall
with suitable
i n s u - l a t i n g
material.
16
• Fit the flange supplied to the hole.
17
• Fix the hose to the coupling on the
back of the unit (figure A).
• Attach the end of the tube
16
ge as shown in the figure E.
17
When the hose is not attached, close
the hole with the bung on the flange
NOTE:
When the unit is installed semi-permanently,
we recommend leaving a door slightly open
(1 cm is enough) to ensure an adequate
exchange of air.
DEHUMIDIFICATION (only for mod F14
and F15)
Position the appliance in the room without
inserting the hose; in this way the dehumidi-
fied air will exhaust directly into the room.
HEATING (only for mod F15)
Position the appliance in the room, inserting
21
the cover instead of the hose
17
to the flan-
E
16
.
17
.
17