Philips RESPIRONICS Amara View Gebrauchsanweisung Seite 10

3. Assume different sleeping positions. Move around until comfortable. If there are
any excessive air leaks, make final adjustments. If there are any excessive air leaks
around the nose, adjust the crown strap first. This will move the mask closer or
further away from the bottom of your nose. Some air leaking is normal.
Comfort Tips
• The most common mistake is overtightening the headgear. The headgear should
fit loose and comfortable. If your skin bulges around the mask or if you see red
marks on your face, loosen the headgear.
• Adjust the crown headgear strap to reduce leaks around your nose and to lift the
straps off of your ears h .
• Adjust the top and bottom side straps to reduce leaks at the sides or bottom of
the mask cushion fg.
Removing the Mask
Disconnect the magnetic headgear clips and pull over the top of your head.
Optional: If your mask uses talon headgear clips, disconnect the headgear clips and
pull over the top of your head.
Disassembly
1. Magnetic Headgear Clips - Grip and twist away from the magnetic headgear clip
receiver to disconnect.
Optional: If your mask uses talon headgear clips, grip and twist away from the frame
to disconnect.
2. Headgear - Undo the straps. Pull out of headgear clips and mask frame top
headgear slots.
3. Mask Cushion - Grasp the top and the bottom of the mask cushion, and pull it off
the mask frame i.
8