Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Technical Data
Nominal voltage
Rated power
No-load speed (n
)
0
Impact rate
Impact energy
Max. drilling capacity
Weight
Protection Class
Sound pressure level (L
)
pA
Sound power level (L
)
WA
Max. vibration emission (a
)
h
Noise & Vibration
Wear hearing protection for protection of your
ears.
The declared vibration total value and the
declared noise emission values have been
measured in accordance with a standard test
method (EN 60745-1 & EN 60745-2-6) and
may be used for comparing one tool with an-
other. The declared vibration total value may
also be used in a preliminary assessment of
exposure.
Caution! The vibration and noise
emission during actual use of the
power tool can differ from the declared to-
tal value depending on the ways in which
the tool is used, in particular, what kind of
work piece is machined.
124
EN
230 - 240 V~ 50 Hz
1050 W
0-1100/min
0-5100/min
3.5 J
Concrete
26 mm
Metal
13 mm
Wood
42 mm
3.4 kg
/ II
85 dB(A) / Uncertainty K
=3 dB(A)
pA
96.5 dB(A) / Uncertainty K
=3 dB(A)
WA
13.040-12.002 m/s
2
/
Uncertainty K =1.5 m/s
2
It is necessary to identify safety measures to
protect the operator that are based on an es-
timation of exposure in the actual conditions
of use (taking account of all parts of the op-
erating cycle such as the times when the tool
is switched off and when it is running idle in
addition to the trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
using the tool, limiting working time, and us-
ing accessories in good condition.
Care & Maintenance
Caution! Make sure the tool is
switched off and unplugged.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the mo-
tor and around the on/off switch. Use a soft
brush to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
Caution! If the supply cord is dam-
aged, it must be replaced by the
manufacturer or its service agent or a sim-
ilarly qualified person in order to avoid haz-
ard.
EN
125
Werbung
Inhaltsverzeichnis
