Cameo LUXIS FC Bedienungsanleitung Seite 22

This will take you to the submenu for setting the submenu items (see table, select with UP and
DOWN, confirm with ENTER, change value or status with UP and DOWN, confirm with ENTER).
Settings
Disp Rev
Display Off Timer = Display lighting
Signal Fail
Dimmer Curve
Dim Response
22
= Rotate display
= Operational status with
DMX signal fault
= Dimmer curve
= Dimmer response
OFF No display rotation
ON Display is rotated by
180° (e.g. for overhead
installation)
Off after 20s Deactivates after
approximately 20 seconds
of inactivity
Always On On permanently
Hold last command is retained
Blackout Activates blackout
FTB 10s 10s fade to blackout
User Colour 1 User Colour 1 is activated
Linear Light intensity increases
linearly with DMX value
Exponential Light intensity can be
finely adjusted at lower
DMX values and broadly
adjusted at higher DMX
values
Logarithmic Light intensity can be
broadly adjusted at lower
DMX values and finely
adjusted at higher DMX
values
S-curve Light intensity can be
finely adjusted at lower
and higher DMX values
and broadly adjusted at
medium DMX values
LED Lamp responds abruptly to
changes in DMX value
Halogen Light behaves like a
halogen spotlight with
slight brightness changes