Cameo LUXIS FC Bedienungsanleitung Seite 15

Setting the DMX delay:
Starting from the main display, press MENU to enter the main menu. Now use UP and DOWN to
select the menu item DMX Delay and confirm 2x with ENTER.
Assign the spotlights to one of up to 24 groups (plus Group 0) according to preference, whereby
several spotlights can be assigned to one group. The group number is also the factor by which the
set delay time set in the DMX controller is multiplied. Confirm each entry by pressing ENTER.
The delay time (delay time of the DMX signal) is set by means of a DMX controller in the separate
DMX delay channel of the corresponding DMX mode (0.0s to 2.0s in 0.1s increments).
ENCODER MODE (Encoder Mode)
Four different modes are available as direct access (control element no. 9) for quick and easy
adjustment of the spotlight without a remote controller.
Starting from the main display, press MENU to enter the main menu. Now use UP and DOWN to
select the menu item Encoder Mode and confirm with ENTER. Then select the desired Encoder
Mode using UP and DOWN and confirm with ENTER.
15