Intended Use - Makita DHR280 Betriebsanleitung

Intended use

The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-6:
Model DHR280
Sound pressure level (L
Sound power level (L ) : 104 dB (A)
WA
Uncertainty (K) : 3 dB (A)
Model DHR281
Sound pressure level (L
Sound power level (L ) : 104 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model DHR282
Sound pressure level (L
Sound power level (L ) : 104 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model DHR283
Sound pressure level (L
Sound power level (L ) : 104 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model DHR280 with DX08
Sound pressure level (L
Sound power level (L ) : 105 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model DHR281 with DX09
Sound pressure level (L
Sound power level (L ) : 104 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model DHR282 with DX08
Sound pressure level (L
Sound power level (L ) : 105 dB (A)
WA
Uncertainty (K) : 3 dB(A)
Model DHR283 with DX09
Sound pressure level (L
Sound power level (L ) : 104 dB (A)
WA
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
) : 93 dB (A)
pA
) : 93 dB(A)
pA
) : 93 dB(A)
pA
) : 93 dB(A)
pA
) : 94 dB(A)
pA
) : 93 dB(A)
pA
) : 94 dB(A)
pA
) : 93 dB(A)
pA
Vibration
The following table shows the vibration total value
(tri-axial vector sum) determined according to applica-
ble standard.
Model DHR280
Work mode Vibration
emission
Hammer 14.5 m/s
drilling into
9.7 m/s
concrete
(a )
h, HD
Hammer 13.2 m/s
drilling into
8.4 m/s
concrete with
DX08 (a )
h, HD
Chiselling 10.8 m/s
(a )
h, CHeq
8.8 m/s
Model DHR281
Work mode Vibration
emission
Hammer 13.3 m/s
drilling into
8.9 m/s
concrete
(a )
h, HD
Hammer 13.3 m/s
drilling into
7.8 m/s
concrete with
DX09 (a )
h, HD
Chiselling 9.3 m/s
(a )
h, CHeq
7.9 m/s
Model DHR282
Work mode Vibration
emission
Hammer 14.5 m/s
drilling into
9.7 m/s
concrete
(a )
h, HD
Hammer 13.2 m/s
drilling into
8.4 m/s
concrete with
DX08 (a )
h, HD
Chiselling 10.7 m/s
(a )
h, CHeq
8.3 m/s
11 ENGLISH
Uncertainty (K) Applicable
standard /
Test condition
2 2
2.8 m/s EN62841-2-6
2 2
1.5 m/s Recommended
practical
operation*
2 2
2.6 m/s EN62841-2-6
2 2
2.3 m/s Recommended
practical
operation*
2 2
1.5 m/s EN62841-2-6
2 2
1.5 m/s Recommended
practical
operation*
Uncertainty (K) Applicable
standard /
Test condition
2 2
1.5 m/s EN62841-2-6
2 2
1.5 m/s Recommended
practical
operation*
2 2
1.5 m/s EN62841-2-6
2 2
1.8 m/s Recommended
practical
operation*
2 2
2.4 m/s EN62841-2-6
2 2
1.5 m/s Recommended
practical
operation*
Uncertainty (K) Applicable
standard /
Test condition
2 2
2.8 m/s EN62841-2-6
2 2
1.5 m/s Recommended
practical
operation*
2 2
2.6 m/s EN62841-2-6
2 2
2.3 m/s Recommended
practical
operation*
2 2
1.5 m/s EN62841-2-6
2 2
1.5 m/s Recommended
practical
operation*