Wifi/Lan Interface; Plinth (Apwm 031/035) - Miele PWM 920 EL/RH Installationsplan

WiFi/LAN inter-
face
Plinth
(APWM 031/035)
The washing machine is equipped with a WiFi/LAN interface for ex-
changing data.
The data interface provided on the LAN connection complies with
SELV (Safety Extra Low Voltage) in accordance with EN 60950. The
LAN connection uses a RJ45 connector in accordance with EIA/
TIA 568-B.
Connected appliances must also comply with SELV.
The washing machine can be installed on a plinth (open or box plinth,
available as an optional Miele accessory).
Elevating the washing machine gives a better ergonomic working
position when loading or unloading. It also simplifies the installation
of a drain connection.
 The washing machine must be secured to the plinth immedi-
ately after installation! The plinth must be secured to the floor!
There is a risk of the washing machine falling off a raised plinth dur-
ing a spin cycle if it is not secured.
en - Installation notes
33