Devolo Magic 1 WiFi 2-1 Handbuch Seite 89

35 Network configuration
The channel
Automatic. The devolo Magic 1 WiFi regularly and
automatically executes the channel selection in
this setting. In other words, if the last connected
station logs out, a search for a suitable channel is
carried out immediately. If no stations are
connected, the device automatically selects a
channel every 15 minutes.
It is worth noting that connected devices also have
to support the increased frequency band of 5 GHz.
From channel 52 onward you go into the radar
range. When accessing the device for the first time,
a radar detection phase (DFS) starts automatically,
during which time the devolo Magic 1 WiFi cannot
be accessed via WiFi. This can take up to 10
minutes.
In the Channel field, you can manually select a 2.4
GHz and a 5 GHz channel. If you are not sure which
wireless channels are used by nearby devices,
select the Automatic option.
Hide SSID:
The SSID specifies the name of your wireless net-
work. You can see this name when logging onto
the WiFi, allowing you to identify the correct sub-
net.
2-1
devolo Magic 1 WiFi
selection default setting is If the Hide SSID option is disabled, your network
name is visible. If this option is disabled, potential
network users must know the exact SSID and enter
it manually to be able to set up a connection.
Some WiFi stations have difficulty connecting to
hidden wireless networks. If the connection to a
hidden SSID poses problems, first try to set up the
connection with a visible SSID and only then try to
hide it.
Security
The WPA/WPA2/WPA3
Protected Access) security standard is available for
securing data transmission in your wireless
network. This method allows for individualised
keys consisting of letters and numbers and the
depicted special characters with a length of up
to 63 characters. You can simply enter them into
the Key field via the keyboard.
Personal (WiFi