Reset Button - Devolo Magic 1 WiFi 2-1 Handbuch

21 Introduction
Wi-Fi-LED
3 White LED
* Information about the web interface can be
found in Chapter 4 Network configuration.
2-1
devolo Magic 1 WiFi
Flashing behavior Meaning
Off Status 1:
The Wi-Fi LED is switched off and
the devolo magic adapter is still
ready for use.
Status 2:
The Wi-Fi function ist disabled.

2.3.4 Reset button

The reset button (next to the network jacks) has
two different functions:
Restart
The device restarts if you press the Reset button for
less than 10 seconds.
Factory default settings
1
To remove a devolo Magic adapter from your
devolo Magic network and successfully restore
its entire configuration to the factory defaults,
press and hold the reset button longer than
10 seconds.
Keep in mind that all settings that have al-
ready been made will be lost!
LED status display
(web interface*)
Can be disabled