Pattfield Ergo Tools PE-20MSB Bersetzung Der Originalbetriebsanleitung Seite 98

DUST COLLECTION
1 Attach the dust bag 17 to the dust
port 18. Empty the dust bag regularly.
Caution! Never use the tool without
dust collection to reduce dust-related
hazards.
SAW ARM FIXATION
1 Pull out the fixation knob 16 to unlock
the saw arm 8 before work.
Before storage or transport, push the
saw arm down and press in the fixa-
tion knob.
MITRE CUTS
1 Loosen the rotary table lock knob
counter-clockwise. Lift the rotary table
detent 21 and set the desired angle for
mitre cuts.
BEVEL CUTS
1 Bevel cuts can be combined with mi-
tre cuts. Open the bevel lock
counter-clockwise and set the desired
angle.
GROOVE CUTS
1 Turn the black phillips screw of the
depth setting limit 11 counterclockwise
and pull out the depth setting limit.
Tighten the screw of the limit.
194 EN
2 A suitable vacuum cleaner can be con-
nected to the dust port 18. The port is
capable of a connector of 32 mm (not
included).
SLIDE LOCK
2 Loosen the slide lock knob 15
clockwise to allow for horizontal move-
ment.
To fix the saw at a certain position
tighten the slide lock knob 15.
22 2 The rotary table detent 21
0°, 15°, 22,5°, 30° and 45° in both di-
rections. Tighten the rotary table lock
knob 22 clockwise.
2 Securely retighten the bevel lock
knob 13 knob 13.
Loosen the lock knob of the flexible
fence 24. Retract the flexible fence
from the cutting plain. Re-tighten the
lock knob.
2 Change the cutting depth by turning the
depth setting bolt 10 (counterclockwise
= deeper groove; clockwise = less
deep).
For complete intersection set back the
depth setting limit.
1
counter- 1
engages at 1
1
1
2
2
2
2
2
EN 195