Product Information - NORAUTO NS-228 BT Hinweise Zur Bedienung

Call Transfer
EN
You can transfer voice from loudspeaker to mobile phones during
call.
During talking, press and hold voice transfers from
loudspeaker to mobile phone.
Bluetooth Audio Streaming A2DP
If the connected Bluetooth device supports Advanced Audio
Distribution Profile (A2DP), you can listen to the music stored
on the device through the unit. If the device also supports Audio
Video Remote Control Profile (AVRCP) profile, you can use the
control on the unit or its remote control to play music stored on the
device.
1 Press SRC repeatedly to select [BT AUDIO].
2 Press to start play, press it again to pause.
3 To track up/down, press
.
/

Product Information

General
Power Supply: 12V DC (10.5-14.4V), negative ground
Fuse: 15A
Suitable Speaker Impedance: 4-8Ω
MP3-Link level: 500mV
Audio Section
Maximum Power Output: 50W x 4 Channels
Continous Power Output: 28W x 4 RMS
FM tuner section
Frequency Range: 87.5-108.0 MHz
Usable Sensitivity: Better than 15dB at S/N 30dB
100