Product Features; Noise/Vibration Information; Technical Data - Bosch GFS 350 E Bedienungsanleitung

OBJ_BUCH-209-001.book Page 14 Tuesday, October 31, 2006 9:58 AM

Product Features

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Saw blade guide
2 Saw blade driving pin
3 Safety fin
4 On/Off switch
5 Thumbwheel for stroke rate preselection
6 SDS clamping lever for saw blade release
7 Saw blade
8 Saw blade guard
9 Saw blade attachment hook
10 Saw blade holder
11 Groove on the SDS lever
12 Saw blade latching cam
13 Saw blade hook
14 Cross-cutting table*
*The accessories illustrated or described are not
included as standard delivery.

Technical Data

Power tenon saw
Article number
Rated power input
Output power
Stroke rate at no load n
0
Stroke
Max. cutting capacity
– Wood
– Plastic (solid material)
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these
values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
14 | English

Noise/Vibration Information

Measured values determined according to EN 60745.
Typically the A-weighted noise level of the machine is:
sound pressure level 87 dB(A); sound power level
98 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Overall vibrational values (vector sum of three direc-
tions) determined according to EN 60745:
Sawing wood: Overall vibrational value
2
a =11.4 m/s , uncertainty K=1.8 m/s
h
The vibration emission level given in
WARNING
this information sheet has been meas-
ured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information sheet.
This could lead to a significant underestimate of expo-
sure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given period
of work should also take into account the times when
the tool is switched off and when it is running but not
actually doing the job. This may significantly reduce the
exposure level over the total working period.
GFS 350 E
PROFESSIONAL
0 601 640 5..
W 350
W 190
spm 2000–2800
mm
mm
mm
kg
2
.
GFS 350 E Set
PROFESSIONAL
0 601 640 7..
350
190
2000–2800
16 16
65 65
20 20
1,5 1,5
/ II / II
2 609 932 552 • 31.10.06