Climber 710 Bedienungsanleitung Seite 15

Climber 7.10 / Translation of the original instructions
CLEANING
Clean the outside of the mower after each use, particularly the engine grille and the exhaust zone.
STORAGE AND PROLONGED PERIODS OF DISUSE
Store the mower in a dry place, away from atmospheric agents, and preferably cover with a sheet. If the
mower is not going to be used for a long period (over 1 month), disconnect the positive battery cable and
follow the instructions given in the engine manual. Also lubricate all of the articulated joints.
Regularly check that the battery voltage does not drop below 12,5 Volts. If it does, recharge the battery.
Use the preservative additive for unleaded petrol. If the machine is to be out of use for more than 30
days, drain the fuel from the engine tank to prevent sticky deposits from forming in the fuel intake system
or in vital parts of carburettor. To protect the engine we advise you to use the Briggs & Stratton fuel
additive, available at all Briggs & Stratton authorised services centres. Add the additive to the fuel in the
tank or in the fuel container. Run the engine a little to circulate the additive through the carburettor. The
engine and carburettor can be stored for up to 24 months.
NB.: If no additive are used or the engine is running on petrol which contains alcohol, drain the fuel tank
and run the engine until there is no fuel left.
13