Makita JR103D Betriebsanleitung Seite 5

żОЧОrКХăpШаОrătШШХăsКПОtвăаКrЧТЧРs
АůRІIІżŚ Read all safety warnings and all
instructions. Failure to follow the warnings and
ТЧstruМtТШЧsăЦКвărОsuХtăТЧăОХОМtrТМăsСШМФ,ăirОăКЧН/Шră
sОrТШusăТЧУurв.
Save all warnings and instruc-
tions for future reference.
TСОătОrЦă"ЩШаОrătШШХ"ăТЧătСОăаКrЧТЧРsărОПОrsătШăвШură
ЦКТЧs-ШЩОrКtОНă(МШrНОН)ăЩШаОrătШШХăШrăЛКttОrв-ШЩОrКtОНă
(cordless) power tool.
Cordless recipro saw safety
warnings
1. Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden wir-
ing. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
2. Use clamps or another practical way to secure
and support the workpiece to a stable plat-
form.ăHШХНТЧРătСОăаШrФăЛвăСКЧНăШrăКРКТЧstăвШură
ЛШНвăХОКЯОsăТtăuЧstКЛХОăКЧНăЦКвăХОКНătШăХШssăШПă
control.
3. Always use safety glasses or goggles.
Ordinary eye or sun glasses are NOT safety
glasses.
4. Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
5. Do not cut oversize workpiece.
6. Check for the proper clearance beyond the
workpiece before cutting so that the blade will
ЧШtăstrТkОătСОălШШrĽăаШrkЛОЧМСĽăОtМ.
HШХНătСОătШШХăirЦХв.
7.
8. Make sure the blade is not contacting the
workpiece before the switch is turned on.
9. Keep hands away from moving parts.
10. Do not leave the tool running. Operate the tool
only when hand-held.
11. Always switch off and wait for the blade to
come to a complete stop before removing the
blade from the workpiece.
12. Do not touch the blade or the workpiece imme-
diately after operation; they may be extremely
hot and could burn your skin.
13. Do not operate the tool at no-load
unnecessarily.
14. Always use the correct dust mask/respirator
for the material and application you are work-
ing with.
15. Some material contains chemicals which may
be toxic. Take caution to prevent dust inhala-
tion and skin contact. Follow material supplier
safety data.
SAVE THESE INSTRUCTIONS.
АůRІIІżŚ DO NOT let comfort or familiarity
аТtСăprШНuМtăĚРКТЧОНăПrШЦărОpОКtОНăusОěărОpХКМОă
strict adherence to safety rules for the subject
product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all instruc-
tТШЧsăКЧНăМКutТШЧКrвăЦКrkТЧРsăШЧăĚ1ěăЛКttОrвă
МСКrРОrĽăĚ2ěăЛКttОrвĽăКЧНăĚ3ěăprШНuМtăusТЧРă
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any con-
ductive material.
(2) Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
lШаĽăШЯОrСОКtТЧРĽăpШssТЛХОăЛurЧsăКЧНăОЯОЧăКă
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
ОбМООНăő0ă°űăĚ122ă°Żě.
7. Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
Шut.ăTСОăЛКttОrвăМКrtrТНРОăМКЧăОбpХШНОăТЧăКăirО.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10. Follow your local regulations relating to dis-
posal of battery.
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
pОrКturОăКtă10ă°űăľăŐ0ă°űăĚő0ă°Żăľă10Őă°Żě.ăLОtă
a hot battery cartridge cool down before
charging it.
ENGLISH 5