Removing The Inner Glass Of The Oven Door - IKEA LAGAN AA-2336945-3 Bedienungsanleitung

4. Pull the removed door upwards to
release it from the right and left hinges
and remove it.
To reattach the door, the
procedures applied when
removing it must be repeated
from the end to the beginning,
respectively. When installing the
door, be sure to close the clips on
the hinge socket.
Removing the inner glass of the
oven door
Inner glass of the product's front door of
may be removed for cleaning.
1. Open the oven door.
2. Pull the plastic component, attached
on the upper section of the front door,
towards yourself by simultaneously
pressing on the pressure points on
both sides of the component and
remove it.
3. As shown in the figure, gently lift the
innermost glass (1) towards 'A' and
then, remove it by pulling towards 'B'.
1 Innermost glass panel
2* Inner glass panel (It may not exist on
your product.)
4. If your product has an inner glass (2),
repeat the same process to detach it
(2).
5. The first step of regrouping the door is
to reassemble the inner glass (2). Place
the beveled edge of the glass to meet
the beveled edge of the plastic slot. (If
your product has an inner glass). Inner
glass (2) must be attached to the
plastic slot closest to the innermost
glass (1).
6. While reassembling the innermost
glass (1), pay attention to place the
printed side of the glass on the inner
glass. It is crucial to place the lower
corners of the innermost glass (1) to
meet the lower plastic slots.
7. Push the plastic component towards
the frame until a "click" sound is heard.
25/EN